Accent Stones Emerald Ring 2.76 Ct., 18K White Gold

This custom made ring setting is engineered to accommodate a range of center gemstones including sapphire, ruby, emerald, or a custom gemstone, with side diamonds in pear shape and design options in both accent stones halo and two stone Toi et Moi configurations. The accent stones style positions smaller diamonds around the center gem in precise geometric arrays to amplify light return and increase perceived diameter. Each accent diamond is calibrated to match table size and pavilion depth so that faceting angles synchronize with the center stone, producing coherent scintillation across the ensemble. The two stone Toi et Moi style presents two primary gems set in close but contraposed alignment, the composition designed to balance mass, optical center, and finger ergonomics, symbolizing the union of two people with mirrored visual weight and interlocking proportions. Available metals include 14K rose gold, 18K rose gold, 14K white gold, 18K white gold, 14K yellow gold, 18K yellow gold, platinum 950, and mixed white and yellow gold combinations, each selected for its color temperature and mechanical properties relative to the chosen gemstones.

From a lapidary and gemological perspective the setting supports multiple faceting approaches to optimize brilliance and color saturation. For sapphire and ruby, round brilliant or modified brilliant cuts maximize light return, whereas for emerald an elongated step cut can be specified to emphasize color and clarity rather than brilliance. Side diamonds in pear shape are set in three or five prong configurations depending on size, with the pear facet map typically following a 58 facet modified brilliant template to ensure predictable optical behavior. Accent diamonds for the halo or pavé are chosen in matched color and clarity clusters, commonly in the near colorless range, G through H, and in the VS1 to SI1 clarity band, unless the client specifies higher or lower thresholds. Micro prongs are hand chased and torqued to a precise gauge to secure each accent without obscuring crown facets, while bead setting is used where profile continuity is critical. The prong tips are filed to radiused profiles and burnished into place to avoid point loading on the girdle, and all seats are undercut to remove internal stresses from the girdle area.

The production pipeline is iterative and data driven, combining computer aided design, rapid prototyping, and traditional hand finishing to reconcile aesthetics with durability. The initial concept is modeled in CAD, where virtual light analysis and facet alignment are evaluated to ensure the halo axis and pear side stone orientation do not create light leakage or unwanted dark zones. Proportional constraints such as crown height, pavilion angles, and girdle clearance are set to industry tolerances, typically plus or minus two hundredths of a millimeter, to maintain reproducible performance across sizes. A high resolution 3D print is produced and sprued for investment casting, followed by devesting, pickling, and a controlled anneal to relieve casting stresses. After the basic form is chased and straightened, seat milling and hand reaming establish precise fit for the center stone, the pear diamond, and each accent. Stone setting follows a prescribed sequence, starting with the most embedded elements to avoid recoil, continuing with the center placement, and ending with final prong burnishing and pit work. Polishing is completed with a multistage approach using decreasing abrasive grits to ensure consistent surface finish between the shank, gallery, and head, and white gold pieces receive a thin rhodium plate to enhance color and scratch resistance. Final quality control includes a torque check on prongs, a thermal shock tolerance assessment, and a light performance inspection under both directional lamping and diffuse ambient conditions.

Functionality and long term wearability are considered at every decision point, with shank cross section, comfort fit radius, and prong geometry tailored to each metal choice and stone pairing. For platinum 950, thinner shank profiles can be used without sacrificing strength, while rose gold and yellow gold in 14K offer warmer color with slightly higher hardness compared to 18K alloys, which deliver deeper color but require slightly thicker prongs for equivalent longevity. The Toi et Moi arrangement is engineered to maintain a low profile where desired, with the gallery structured to protect pavilion facets and to distribute impact forces evenly into the shank. For accent stone halos around harder gemstones, micro pavé channels are canted to optimize sight lines and reduce dirt accumulation, and for emerald center stones the halo spacing is increased to protect step cut corners from abrasion. Custom options include selecting diamond color and clarity grades, choosing between closed or open back settings for increased light penetration, and specifying a pear side diamond with slightly different length to width ratio so that overall silhouette matches the wearer morphology. We offer technical consultations to finalize specs, provide gemological reports for center and side stones, and outline recommended maintenance, which includes periodic tightening inspections, ultrasonic cleaning only when stones are secure, and gentle re rhodium plating for white gold as needed. Lead times vary with customization level, normally four to eight weeks from final approval, with expedited routes available for specific projects.